Mounting brackets for Eco-Worthy 50AH LFP battery pack in Ryobi RM480 mower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Securely mount an Eco-Worthy 50AH LFP pack in place of the lead acid batteries in a Ryobi RM480e lawnmower.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When converting a Ryobi RM480e electric riding lawn mower from lead acid to lithium, it's important that the new battery pack be securely mounted.
(UPDATE: I'm told these brackets will fit only the 75 AHr model [RM480e], not the 100 AHr model [RM480ex] because it has a slightly different battery tray.)
I used an Eco-Worthy 48V (51.2V) 50Ah metal-case battery pack, with dimensions of ~437 x 333 x 125 mm (17.2 x 13.11 x 4.92 inches).
It's available from Amazon, eBay, and here and here on AliExpress.
My understanding is that all orders ship from the same US warehouse.
(These links include my referral code, which earns me a small commission at no cost to you:)
These mounting adapters firmly clip into the battery sled on multiple sides, making them a bit tricky to get in place. Fully loosen the tightening bolts at both ends. Slide in one 3D-printed mounting adapter, fully seat it, carefully angle in the matching second one, and push it down in the center to seat them. (See the 4-in-1 photo for details.) Install one pair, slide in the new battery pack, then install the other pair. Finally, tighten up the sliding brackets front and back and reinstall the tray in the mower.
I printed mine in PETG with 10 exterior walls and 15% infill, but use whatever works for you.