Cable Manager for SVBONY Telescope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Have an excessive cable mess on your SVBONY Telescope? Here's a solution I designed!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a solution for all my draping cables attached to my budget SVBONY Astrophotography rig. Rather than buying shorter cables of unsure lengths depending on slew direction and going crazy with velcro, I decided on designing this cable manager that would sit mounted on the tube rings of my SVBONY 48P that way I have control of how much cabling I need, whether long or short. The holes that allow mounting of this cable manager are spaced approximately 182mm apart from threaded hole to threaded hole, so measure the distance of yours to see if it would be a good fit as most SVBONY telescopes should have the same space between tube rings.
Printed with 6 walls and 25-35% infill. The top cover can be printed with less of the two. Supports needed.
Like what you see? Consider a follow on our Youtube and Social Media pages.