Revopoint Trackit Cold-Shoe Mount for Smartphone Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Revopoint Trackit Cold-Shoe Mount for Smartphone Holders to allow convenient remote desktop while scanning
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Tried a lot of different options with the Trackit to live-view my scan progress without constantly staring at the PC screen. Started with RDP to my tablet, then RDP to my AR glassed and now landed at the final solution I like the most: I just use a cold-shoe smartphone holder directly at the hand piece so I don't need any special equipment and no additional stuff to carry around. To enable RDP even at offsite locations I have a small tp-link travel router (WR-3002AX) that can be powered over 5V USB, therefore I just plug in LAN and USB to my PC and connect my phone to the WiFI. Et voila RDP works.
Mounting the smartphone to the hand-piece was the hardest part. Initially had no idea how to fit it without disturbing the grip or button presses. Then I got a nice adjustable smartphone holder for birthday and finally had a solution in my hands. Only thing missing: A cold-shoe mount on the Trackit hand-piece which I had to design. To ensure proper fitments and ergonomics I created multiple scans as a basis.
Scans
I used the POP 4 to create three scans:
Trackit hand-piece (laser mode, dark object setting, no spray used but maybe should have used since the carbon weave became visible). Marker geometries were placed on the hand-piece's rim, scanner did also see the 10mm markers already on it.
Smartphone holder in a position that works (laser mode, normal setting, spray was used due to the fact that the black anodizing absorbed too much light)
Comfortable grip whilst pressing the top-most button (needed to ensure enough space is available to press all buttons under the holder, Hybrid HD mode with feature tracking)
All scans were processed with default settings. Third scan may have also worked in VSCEL since I didn't need the higher detail of Hybrid HD
Design
For design I imported all scans in Quicksurface Pro and first aligned the 1st scan to the coordinate system and cleaned it up. Then I fit the third scan by picking common points and isolated the hand in the third scan. Based on these two scans I now could place the smartphone holder in a position that doesn't obstruct the button press and grip (nearly a perfect fit xD).
I then auto fit a surface in the crevice of the hand-piece which will be used as contact area for double-sided tape. After thickening and cutting it to the right size to nicely fit in the niche I combined it with my default cold-shoe mount I imported in Quicksurface as a STEP-file. Last steps were some fillets and chamfers. Not a too hard design but for me quite useful. Whole scan and design took roughly 2h including one revision to enlarge the contact area for the double-sided tape (includes wait time for the first print).
Printing
Printing is best done from PETG or ABS. YOu may want to roughen up the surface of the print and use IPA to wipe any grease from the contact areas before attaching the double-sided tape (I used two layers to have a bit of additional thickness). Firmly press the mount in place to ensure good contact. Then enjoy your new freedom from a PC screen with the Trackit.
Smartphone Mount used
Any other tiltable cold shoe smartphone mount should also work, just like this one. But this one is tested to ensure buttons are still reachable and has endless swivel points for adjustments. https://www.smallrig.com/de/smallrig-Metal-Phone-Holder-with-Cold-Shoe-Mount-4382.html