Magnetic Cover Mount for PolyHeater CoreOne Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Conveniently store the port covers from the PolyHeater Core One chamber heater mod while in use.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU Lesser General Public License
I had already built my PolyHeater mod when I ran through the comments & saw recommendations by OlaKP and Rschell_3953494 to add magnetic mounts for the covers. I don't have a lot of desk space, so this seemed to be a great idea. Others had already modded covers with magnetic inserts included, but I didn't want to have to reprint/reassemble mine.
The STL was generated using OpenSCAD. If you need to make adjustments for things like material expansion or printer accuracy, just edit the user parameters in the script & regenerate it. Mine fit perfectly, but I added a bit of adhesive to the backs of the parts just to make sure they stay there after thermal cycling.
I installed a 5mm x 2mm N52 magnet in each of the parts (a total of 4).
Printed in PETG, 0.2mm layers, 0.4mm nozzle. I previously calibrated for shrinkage compensation (Filaments > Advanced > Shrinkage compensation) using a calibration strip; I prefer this method over adjusting using model scaling to fit.