Star Trek: Discovery S3 / Starfleet Academy Phaser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make the 'Great White Shark' Starfleet phaser from the shows set in the 32nd century.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 113
- Wydruki
- 6
- Wyświetlenia
- 428
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Here's my try at the 'shark' phaser introduced in Discovery season 3 in the 32nd century Starfleet. Also used on Starfleet Academy.
Big pieces require good supports and time. I tried to add some built-in support beams for the tall parts but you will also need to add more (organic/tree is best, using paint-on support tool). If you don't want the built in supports just separate them as objects in your slicer.
The small badge is a 'programmable matter' device that acts as a storage holster for the phaser. The files for it are labeled 'pm'. For best print resolution use classic perimeter generator for the pm delta, and use arachne generator for the pm base angled. The delta should snap in and not need glue. Uses 6x2 mm magnets.
There are optional inserts for the gills that you can print in white or blue for that lit up vent effect.
Use color swapping on the grip cap insert to go from dark silver to silver.
Reference attached graphics for color schemes.
Display stand included.