Support leg of Stendi 60 clothes drying rack drip pan (updated)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement support leg of drip pan for Stendi 60 Portable Indoor clothes drying rack, made by Lifestyle Clothes Lines
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Our trusty and ever lasting Stendi 60 clothes drying rack has a broken support leg for holding up the drip tray.
This is a replacement leg to silence my annoyance with it :-)
Simple structure to print - adapt infil as you see fit. I used PLA and 30% gyroid and 3 perimeters.
Some might find the peg-in-hole a bit tight - feel free to scale it down ever so slightly.
UPDATE 2022 May 07:
The original STL file seems broken and repairing it doesn't result in a successful print. So I remade it entirely in Fusion 360 and refined the model a bit.