1 / 4
Front Reflector Clamp for a Bicycle Head Tube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front reflector adapter for bicycles with a head tubes of 62mm in diameter.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to move my front reflector from my handlebar to my head tube to clear my cockpit a little.
It's designed for a head tube of roughly 62mm in diameter.
To mount it, you need M5 screws, washers, and nuts (two of each).
Perhaps someone might just have the same reflector design :)
Mine seems to be called CAT EYE RR-180-SL.
Printed using ABS, though ASA would probably be better, but I didn't have any.
Due to the circular design, I would recommend using 3D honeycomb infill (30%).
I also used organic tree supports.