Minimalistic parametric foldable mobile phone stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The design was inspired by https://www.thingiverse.com/thing:3416790 The original design works very well, but the hook…
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 344
- Wydruki
- 3
- Wyświetlenia
- 1403
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
The design was inspired by https://www.thingiverse.com/thing:3416790 The original design works very well, but the hook in which the phone rests is quite large. Most video players on phones have position sliders at the very bottom of the screen, meaning that you need to take the phone out to change position in the video. Thus a new design was born.
- v1.0, 1.Feb.2020:
Initial release
Uses "OpenScad library. Threads for screws and nuts V1" by ANDRES ROMAN (AKA Cuiso) September 2018 V1.2 https://www.thingiverse.com/thing:3131126
There are two STLs, one for phones up to 8.5mm thick, the other for phones up to 9.5mm thick. You can also use the SCAD file to customise dimensions, including generating a stand with two hooks, one for thinner and one for thicker phones.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Category: Mobile Phone