1 / 2
Beurer infrared lamp support
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We use a Beurer infrared lamp. However, the original stand is defective in that if only allows the lamp to tilt up,…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
We use a Beurer infrared lamp. However, the original stand is defective in that if only allows the lamp to tilt up, not down.
So I designed a replacement stand that allows tilting up and down.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
5%
Filament: Azurefilm PETG White Post-Printing =============
In order to assemble the stand you need:
- 2pcs 5x20 self-tapping screws (I used https://www.spax.com/en/products/universal/flat-countersunk-head/universal-screw-5-x-20-mm-125-pieces-full-thread-flat-countersunk-head-cross-recess-z2-4cut-yellox-4081020500207/pid-372/)
- 1pc M6x25 bolt
- 1pc M6 nut
- 2pcs M6 washer
- 4pcs 8mm diameter self-adhesive rubber feet (optional, can be changed or eliminated in OpenSCAD model)
Category: Replacement Parts