Flying Saucer UFO (fidget / ornamet)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vintage 1956 model as seen in classic sci-fi movies
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Public Domain
The middle layers can spin freely and independently. Includes a small discrete top hole for mounting a fishing line, such that it can be used as an ornament or a stop motion movie prop.
Requirements:
A well-tuned printer, as the threading tolerance is tight - makes it possible to dial in the tension for desired spinning speed without falling apart.
Recommended print settings:
2 perimeters or more - outer perimeter first
15% infill
0.15mm max layer height (steep slopes might otherwise look steppy)
Well tuned scarf seams enabled (important for a good finish)
No supports or brim necessary
Tips:
Default size is 10cm in diameter, but it scales all the way down to 5cm without problems (I suggest to increase infill to 100%).
While tempting to print in grey or silver silk filament, Panchroma Matte Muted White PLA hides the seams better and makes it look almost exactly as in the flying saucers movie : https://www.facebook.com/groups/CultTVmanGroup/posts/10162279794541013/
If you like this model, you might also be interested this classic sci-fi space craft from the 1902 film "A Trip to the Moon":
.