Tek Lok Compatible Warp Saya Back
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added mounting holes compatible with Tek Lok for vertical or 45 degree mounting options.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you aren't a fan of molle, and want a bit more flexibility than the printed belt loop, this is a good option to belt attach the Warp Saya to any belt, strap, or sling by clipping it on instead of lacing it through. Be sure to grab the Grip and Front .STLs for the Warp Saya from the flaring and ease of assembly remix to complete your magazine holder build. If you use angled talon mags, I also made a remix of the flared Grip for talon mags here.
The mounting holes allow for either a straight (or 90 degree perpendicular) mount with the closest two holes, or an angled mount at 45 degrees with the furthest two holes.
If you don't have any Tek Lok, the print in place Hek Lok by Engineer4Fun has the same spacing and is compatible with this remix. The attached photo uses the printed Hek Lok instead of the commercial Tek Lok.
I've also published adapters for M3 hardware to the Tek Lok standard screws so you don't need to get the Tek Lok Chicago screws.