LEGO x KAWS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a concept of what a LEGO x KAWS Companion could look like. There are 3 variations of the head. One is just a…
- Ocena
- 4,667 / 5
- Polubienia
- 411
- Pobrania
- 2681
- Wydruki
- 15
- Wyświetlenia
- 12 755
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a concept of what a LEGO x KAWS Companion could look like. There are 3 variations of the head. One is just a regular lego head with a cap for the ears. The other two have the ears attached to the head, the only difference being one has a lego stud on top. I printed at 200%, but the original size should be very close to mini-figure scale.
Print Settings
Printer:
PRUSA MINI
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
10%
Filament:
Overture PLA
MATTE BLACK
Notes:
These settings are for printing at 200%. Higher resolution may be desired for scale parts.
I used calipers and drawings to make the parts in Fusion 360
Category: 3D Printing