MantisX mount for the Feinwerkbau P8X
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slide-in adapter to mount MantisX (or other picattiny rail compatible items) to barrel cover of FWB P8X air pistol
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Feinwerkbau P8X MantisX Adapter
A 3D-printable adapter for mounting a MantisX device to the Feinwerkbau P8X side groove. It slides onto the pistol’s side-groove profile and provides a Picatinny rail interface for attaching the MantisX (or other compatible items).
A short piece of 1.75 mm filament should be inserted as a removable wedge to tighten the fit after the adapter is in place.
Fit Notes
Print tolerances, filament type, slicer settings, and individual pistol dimensions may affect the fit. The adapter may need minor sanding or scaling depending on printer calibration.
MantisX on air pistols
MantisX if properly calibrated and mounted has a good precision to track barrel movements and trajectory during ISSF air pistol trainings. Of course it doesn't show you a shot positions, but hold stability and trigger errors are well visible during the sessions.
Especially useful that tracking become when pairing it with external analytics tools (thanks MantisX for allowing data exports). Deep Mantis is an option for such analytics.