1 / 1
Itiwit kayak Skeg & Locking clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Larger Itiwit skeg to improve tracking
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- GNU General Public License v3.0
The original skeg's for the Itiwit inflatable kayak were a bit too small and tracking was awful so I made these instead. They are about 45mm deeper but much wider giving approximately double the surface area. I didn’t want to make them too deep as quite often get out at sand banks on the river
Ive used them a few times now and seem to be holding up well. Tracking has improved and was able to travel faster as not having to compensate with over steering.
Printed in ABS at 0.2 layer, 4-5 perimeter walls at 60% Gyroid infill and I didn’t use any supports