Ender-2 Pro BLTouch Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recently purchased an Ender-2 Pro for myself as a fun little side printer (My main printer is a heavily modified…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 1111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I recently purchased an Ender-2 Pro for myself as a fun little side printer (My main printer is a heavily modified Ender-3 V2). I really wanted to install a BLTouch on it, but none of the "official" creality mounting plates work with the tiny x-axis carriage. I couldn't find anything here on Thingiverse that could help, so I decided to model something myself. Here it is! Also, I had the STL for the petsfang duct BLTouch mount so I decided to use that to mount to the bracket. Well, have fun.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
55%
Filament: Fulament Matte PLA Red
Notes:
I used a 0.6mm nozzle because it prints faster. You shouldn't have any issues printing at 0.2 mm layer height, I just like to print at 1/2 my nozzle width.
Mounting the probe
To mount the BL Touch to the carriage plate, I printed the ALL_BLT_LEFT from Thing:4759439 (This is from the petsfang duct thing page). I then used two screws to attach it directly to the mounting plate I made.
The offsets that you need to put into your firmware are X: -43.5 Y: -7.3 Z: -1.82 (though I recommend running the Z-probe offset wizard once you have everything installed to adjust it to your liking).
Category: 3D Printer Parts