100 mL Bottle Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I work with a lot of optical engineers and sometimes they have me make things for them. This is a simple bottle stand…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I work with a lot of optical engineers and sometimes they have me make things for them. This is a simple bottle stand that I designed to shift the center of mass of the bottle lower so they wouldn't knock them over.
I have included the .stl because Thingiverse requires it, but use the .3mf because it is a superior format.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
15
Notes:
Should print perfectly without supports
How I Designed This
Step 1:
Create a sketch in F360 and have a centered rectangle that is 80mm x 80mm, centered at the origin.
Add a centered circle that is 56.50mm (*adjust for your printer's tolereances!*)
Step 2:
Use the Extrude command to extrude the circle up 3 mm
Step 3:
Use the Extrude command to extrude the rectangle minus the circle up the 33mm (30mm + 3mm for the previously extruded circle)
Step 4:
Use the Fillet command to add a fillet to the four outer edges, at 5 mm
Category: Tool Holders & Boxes