50mm Pocket Watch Strap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wrist strap for 50mm pocket watches. More of a fun than real use but usable if really want to.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Public Domain
Print strap with TPU with 0.2 layer height. Opening ironing setting also reccomended. You can use PLA or PETG for pin but print very slowly with thin layer height like 0.12 with fan on and z seam choosed random since it's very small part you can turn on make overhang printable on this one too if had problem. Holes on pin side of strap can usable for fine tuning between main holes. You can use strap for hanging watch to a pin on wall or etc. or bend strap's connection with case using soldering iron to wear it little more comfortable.