Bed Scraper - Carbon Fiber

Summary

I was dissatisfied with many of the available bed scrapers. While designer handles are nice they tend to degrade the integrity of the tool and result in longer prints. (KISS). I designed this to be a strong and simple to print that fits in the hand well. 

Features

• Simple

• Light weight

• Strong!

• Fits very nice in ones hand

• A hole in the handle area for hanging

• Square pocket to fit 3x3x1mm magnets

• Round pocket to fit 3x1mm magnets

Example Print Settings

• Material: Polymaker Fibron PA612 CF

• Hard Nozzle: 0.4mm @ 290°C

• Bed: Prusa PA Nylon Sheet @ 110°C

• Chamber Temp: 50°C

• Layer Height: 0.1mm to increase the strength and smoothness of the slope.

• Max Volumetric Speed/Flow: 8mm³/s

• Infill: Default 10% Cubic

• Walls: 4 to ensure edge strength

• Brim/Skirt: 5mm outward

 Notes

• The above settings are calibrated for my specific machine and the current batch of PA612-CF in use.

• Filament was dried to under 15% humidity

• Lightly sand the tool as carbon fiber filled filament can have a "sandy" feel when left raw. 

• May need to deburr the magnet pockets due to the brim creating a thin layer

• The JD3D lettering shown in the example print has been removed

• I plan to really test the strength of this in the near future and will update

• The magnets press in an no glue was used. I designed and made a carbon fiber punch to help with this in the future and can be found below

Thank You

Thank you for taking the time to visit my page. If you enjoy my design and prints, please consider liking, downloading, and saving to your favorites.  Constructive feedback is always welcome, it's the best way for me to continue improving!

Products

• CoreOne+

• CoreOne+ Ultimate

• MK4

• Polymaker Fiberon PA612-CF15

• Polymaker PolyDryer Box

Disclaimer:

• Links may take you to Amazon or Prusa.com for products I endorse and use on a regular basis.

• JD3D is not responsible for any damage or harm caused by improper production, assembly and use