CamBam Lux TPU Mount - Fixed Clearance
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corrected the Five33 CamBam TPU mount for the HDZero Lux camera
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v3.0
I encountered issues with the original Lux mount for the Cambam. If you use 2.5" props (as intended), you only have 16.75mm gap between the blades for the camera mount. Because of this I built a similar version with improved clearance, reduced material/weight and additional angles (25 and 35 degrees).
Uploaded STL and STEP files for additional editing if desired.
Print instructions:
The version I bought seemed to be printed in TPU at 100% infill, but this seemed a bit overkill so I kept mine at 25%infill, gyroid.
Print face down (with the camera lens facing the heated bed)