1 / 3
Replica of Grenadier Specialists 2006 #1 Miniature — zdjęcie 1
1 / 3

Replica of Grenadier Specialists 2006 #1 Miniature

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replica of the classic figure #3 from the Grenadier box Specialists number 2006. (see…

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
119
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
People
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replica of the classic figure #3 from the Grenadier box Specialists number 2006.

(see http://www.dndlead.com/grenadier/ADandD/2006.jpg )

Scan made using https://www.thingiverse.com/thing:1762299

"Half-orc cleric"

Also appeared in some versions of set 5001 Dungeon Explorers as an alternate of https://www.thingiverse.com/thing:4780594

"Assassin"

This one should be of particular interest to collectors. The mace handle is a weak point, so it would break off easily. As a result, many original models are probably not intact. Unfortunately, that is a weak point in the reproduction, so you have to be very careful when removing the support material.

Since this model completes the set of Specialists, they all posed for a photo opportunity in the original box.

Print Settings

Printer Brand:

Monoprice

Printer:

Maker Ultimate

Rafts:

No

Supports:

Yes

Resolution:

0.1mm

Infill:

25%

Filament: Hatchbox PLA blue


Notes:

Print at 120% to match size of original.
Set Z = -0.4 mm

I recommend adding extra support around the mace (see image).

Be careful when removing the support as the mace handle is very thin.

Category: Scans & Replicas

Tagi