Festool Systainer ORG + S76 Box collection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
System of boxes for festool/Tanos SYS3 ORG and S76 systainers
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 852
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Full system of boxes for festool/tanos SYS3 ORG and SYS3 S76 systainers with special features that makes them stand out in my opinion
UPDATE:
1. I was missing the ends for the dividers, these have now beed uploaded under "dividers".
For SYS3 ORG and SYS3 SORT/3
Boxes range from 2x2 up to 6x10 in both full height and half stackable and have the following features:
Can be divided crosswise and lengthwise after printing the box, no need to choose when printing
Insert for bit storage 3xbits 1/4" shank 25mm long
Shelf for storage of drillbits or bits
3D printed labels that are easy to see
Also have height box with room for Festool drill/bit cassettes that lock into place
For the S76 you need to print the bottom and lid from this collection:
All these boxes also have the features from the bigger boxes.
Print settings:
0,4mm nozzle
No AUX fan! big risk of warping
Dividers and divider ends prints flat on the bed.
Can be printed with brim if warping is an issue.
The labels prints with the text parallel with the bed, maybe add brim.