Modular pool nozzle remixes for Intex 38mm hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minor modification to the original with tapering and a barb for a better fit on ridged pipes
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original version is designed for the flat section at the end of the ridged Intex hoses. I have a few hoses that have been cut and no longer have the flat section so need a larger diameter connector. I designed these to taper from the original 39mm diameter out to 41mm, and added a ridge/barb to help retain the hose.
I'm using these with the Intex surface skimmer. The angled version works really well to take pressure off the hose.
Follow the printing instructions on the original model. The angled version can be printed at 45 degrees if you slice a couple of mm off the end of the connector and print with support (look at the rotated version of the originals).