1 / 1
shorter focuser tube for skywatcher 130p
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was annoyed at the stock shiny focuser tube sticking out in front of the mirror so I made a shorter one which is…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I was annoyed at the stock shiny focuser tube sticking out in front of the mirror so I made a shorter one which is about 70mm long so doesn't really stick out ever, i found its best to print it with the threads at the bottom and a variable layer height biased towards quality, this way the teeth don't have overhangs and it prints quite well.
Category: Hobby
