DPS5005 Power Supply Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the awesome and affordable DPS5005 Power Supply: https://www.banggood.com/RD-DPS5005-50V-5A-Communication-…
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 409
- Wydruki
- 0
- Wyświetlenia
- 2880
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A case for the awesome and affordable DPS5005 Power Supply:
It has support for the USB communication board, please choose the correct option if you're purchasing it.
Most of the screws used are from this kit:
The case houses this beefy AC/DC power supply inside:
Tip: I removed the bleeding resistor R12 from the board, as it can get quite hot even without load. Only side effect, is that the output capacitors will take a bit more to discharge.
The power button in the back is this one:
And here you can get the power cable:
The banana terminals in the front can be found here:
And finally you can use them with these alligator cable:
For the fan, I used a silent Noctua:
and powered it with a small 5V power supply, so it runs more silent, like this one:
WARNING: Building this means dealing with mains voltage, which is hazardous and can cause even death. Please make sure you are qualified to do this kind of project!