F3D Parametric Scoop, No Supports, for Creatine, Protein Powder, Supplements, Etc.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customize this scoop with parameters in Fusion 360.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametric Dosing Scoop — Prints in Place, No Supports
I needed a way to consistently dose a DIY electrolyte powder mix without reaching for a scale every time, so I designed this scoop. Most of the models I found required printing supports or bridges, so I made one that prints flat and in place — no supports required. Bonus, it'll sit on the counter without tipping over.
The included Fusion 360 (.f3d) file is fully parametric, with 9 custom user parameters so you can size the scoop however you need.
Dialing in your exact dose: The file also contains a hidden body that fills the cup volume. Right-click that body and select Properties to read its volume in cubic millimeters. Once you know the volume, it's easy to adjust the parameters to hit your target dose.
I've also included one STL file that's sized to scoop 5g of creatine.
All my models are free — if you want to support the filament habit, send me a small tip here.