Foxbat pump Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attaches to picatinny top slide to convert the Foxbat into a pump action springer
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
My Dan's Pistol was super fun to use as a pump action, but it kept bending darts. Since my Foxbat has always been reliable, I thought I'd convert it to pump action. This is not the most svelte mod - attempt numero uno - but it works well. For this mod, you must use the picatinny top front slide and the one-piece side panels from SillyButts.
M4 Hardware to mount on the picatinny. 3 mm pins to mount the rollers.
In its current incarnation, you'll need to remove ~2 mm of material from the bottom rails of your FoxBat. Otherwise, the pins rub against it. This has no effect on the functionality of the bottom rail.
I'll likely move to larger rollers on future iterations, so that the pins can be moved outward, away from the bottom picatinny rail.