30mm Water Pump V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully 3D printable water pump using the incredibly common 3-6V DC motor that can be bought just about anywhere.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 230
- Wydruki
- 0
- Wyświetlenia
- 1647
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
30mm Water Pump V1
This is a fully 3D printable water pump that uses an ordinary 3-6V DC motor and a rubber-like rotor that is 3D printed. The idea for this design came from many iterations of trying to make a 3D-printed water pump that allows you to swap out the motor whilst keeping the whole thing sealed. a Rubber O Ring is also required to keep the pump sealed. If desired, the O ring could be printed rather than bought.
Useful Links
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.4mm
Infill:
10%
Filament:
PrimaValue/TPU PLA/TPU N/A
Notes:
For best results buy a suitable Rubber O Ring for the casing Seal and print the Cable and Front seals with TPU filament. The rest of the casing can then be printed in PLA.
Technical Drawing
