50mm Water Pump V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully 3D printable water pump using PLA and TPU filaments. A typical DC motor can be used for this pump.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 179
- Wydruki
- 0
- Wyświetlenia
- 1235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
50mm Water Pump V1
A sealed water pump designed for a 9V Motor, using 3D printed parts for seals as well as a rubber O-ring. The pump can move a fair amount of water, as shown in the attached video. Sadly the motor used for this pump is discontinued, however, a suitable motor is sourced below.
Useful Links
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.4mm
Infill:
10%
Filament:
SainSmart/PrimaValue TPU/PLA N/A
Notes:
For best results, print the main body in PLA and the seals in flexible TPU. As for the O ring, it is recommended to buy an O ring rather than print it as this will give the best shape. If the user wants to pump at maximum speed, it is recommended to use PETG rather than PLA to stop the casing from warping with heat.
Technical Drawing
