Self-Watering Planter — Wicking Pot for Herbs & Houseplants (Customizable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A self-watering planter with a water reservoir that keeps herbs and plants hydrated for days.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
A two-part self-watering planter: the inner pot holds soil and the outer base holds a water reservoir, wicking moisture up so herbs and houseplants stay hydrated for days — great for forgetful waterers or holidays. A fill gap and overflow keep the level safe.
Parametric: set the diameter, height and reservoir depth for small herbs up to larger plants.
Print settings: 0.2mm layers, 3-4 walls, no supports. PETG strongly recommended (holds water far better than PLA).
Want it in a different size?
This STL is free here and stays free. The catch with a fixed STL is that you cannot actually change those dimensions — so I publish the editable OpenSCAD source for this model on Cults3D. Open it, set the numbers you need, export your own STL:
Self-Watering Planter — Inner Pot + Reservoir for Herbs & Houseplants (Customizable)
If you want a browse, I have 500+ printable models there: https://cults3d.com/en/users/cecogatev
