Star Wars Omicron-class Attack Shuttle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of the Marauder, a modified Omicron-Class Attack Shuttle from Star Wars: The Bad Batch, with moving wings
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution
The Marauder was a modified Omicron-Class Attack Shuttle used by Clone Force 99 aka The Bad Batch. It appeared in the final season of The Clone Wars and most of The Bad Batch. (There were some changes between Clone Wars and Bad Batch. This model is based off of Bad Batch.)
Its design is similar to other classic shuttles, being closest to the Theta-class T-2c shuttle. It also uses some parts fromt the Nu-class, namely the shape of the body and some bits between the body and the cockpit.
This model has moving print-in-place wings.
It has a hole compatible with big pin and base (link). You will need two pins.
Dimensions
The model is at 1:270 scale.
Length | Width | Height | |
|---|---|---|---|
Flying | 112mm | 138mm | 70.9mm |
Landed | 112mm | 39.6mm | 63.4mm |
Print Instructions
Printed at 0.15mm layer height.
Requires supports on buildplate.
Add "omicron shuttle-support blocker" as a support blocker to "omicron shuttle-main".
The top wing is printed separately.
You can print "omicron shuttle-wing test" to test if the hinges work with your printer and settings.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#