1 / 5
Dragon scales #3 - to print on Fabric for cosplay - (DS#03_v01) — zdjęcie 1
1 / 5

Dragon scales #3 - to print on Fabric for cosplay - (DS#03_v01)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dragonscales to print on tulle fabric, nice for cosplay or decoration - READ DESCRIPTION

Ocena
0 / 5
Polubienia
64
Pobrania
179
Wydruki
0
Wyświetlenia
1133
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Dragonscale to print on Tulle Mesh.

on the photos i used Tulle mesh made from 100% Polyester, 28g/m².
I needed Brims to stabilize the scales.

Instructions:

  1. Arrange the scales according to your liking.

  2. Use Adaptive Layer-Height print the base with 0.16mm layer-height

  3. use 0.12mm Layer-Height for the tip

  4. after printing a height of 1.5mm you need to insert a pause in the slicer.

  5. when the print then pauses, lower the print bed

  6. cover everything with the tulle mesh and fix it with magnets.

  7. the magnets must be lower than the actual print level.

  8. then continue the print

Of course, you can print the Model without the mesh.

The model has small holes on the base which can be used to sew them onto any fabric.

Embedding the demo-video seems not to work, so here's the link to youtube:
Youtube Video

Version:
DS#03_v01
DragonScale #03 _ version 01

Tagi