Easier to brake tensile strength model 1, 2 and 3 mm breakpoint.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easier to break tensile model for a tensile tester.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
There was need for a easier to break tensile test model.
I build a tensile tester bij RobertCowanDIY with a remix for the Aliexpress scale I have.
I found that the scale I have is a bit sensitive for the jolt at the breakpoint of the filament sample.
The tensile tester is used in class at the laboratory school I work. Student need to record the force needed to break different types of filament and printorientations. They break at least 3 identical samples and conclude if it is a reliable test and what might cause a difference.
The jolt of the breaking sometimes cuts the power of the scale so the test failed.
I tested 1, 2 and 3 (standard of other samples) mm breakpoints.
The 1 mm sample breaks easily so the scale keeps working.
I printed in pla, petg and tpu. The tpu (see the photo's of the black sample) is funny to use because it doesn't break with 10 cm expansion but stretches. This shows the difference in material properties nicely.
Personally tested with the tensile tester by RobertCowan DIY.
https://www.printables.com/model/889922-simple-tensile-strength-tester