Updated ATU-100 case for genuine N7DCC Designed PCB boards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated ATU-100 case for genuine N7DCC Designed PCB boards.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updated ATU-100 case for genuine N7DCC Designed style of boards. The original design doen't have enough room for the boards with the genuine Red Toroid inductors'
I have also updated the rear cover to take to more popular (and more widely available) 4 hole SO239 connectors and a proper 5mm power connector.
The case is screwed together with M3 x 12mm mushroom head stainless bolts and the board and so239 are attached with M3 x 6mm mushroom head stainless bolts. for an ground connection on the so239, I changed an 6mm bolt for a 12mm bolt and added a M3 round connector where I soldered on the grounding wire from the coax.