1 / 2
Bruder CAT Midi Excavator Arm Repair Brackets — zdjęcie 1
1 / 2

Bruder CAT Midi Excavator Arm Repair Brackets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are small brackets that can be used to fix a failure mode that appears to happen quite frequently with these toys

Ocena
5 / 5
Polubienia
1
Pobrania
9
Wydruki
1
Wyświetlenia
106
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

As evidenced by one of the attached photos, the right part of the main boom breaking seems to be a frequent failure mode on the Bruder midi excavator / CAT Minibagger 02456. I made this little clamp that is super quick to print and can just be CA-glued to the arm. Seems to work quite well and much more economical than throwing away toys ;)

Best printed using PETG, laying flat on build plate and with many wall loops ( > 4). After printing CA glue to the excavator arm and wait a few hours before use.

Tagi