Door Handle Bumper / Wall Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-fit bumper for round door handles that prevents wall damage.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A clean, functional door handle bumper that presses onto round door handles and absorbs impact before the handle hits the wall. No adhesives, screws, or tools required.
The inner diameter is 0.2mm undersize for a snug press fit. If your handle is between sizes, go one size up or use XY compensation.
Available sizes (inner diameter → handle OD):
9.8mm → 10mm handle
15.8mm → 16mm handle
18.8mm → 19mm handle
19.8mm → 20mm handle
21.8mm → 22mm handle
24.8mm → 25mm handle
29.8mm → 30mm handle
31.8mm → 32mm handle
PRINT SETTINGS
Material: TPU 95A recommended (85A–98A Shore hardness works)
Layer height: 0.2mm
Walls: 3 or more
Infill: 15–20%
Supports: None needed
Orientation: Flat side down
Do NOT print in rigid filaments (PLA, PETG, ABS). The part needs to flex to grip the handle securely and absorb impacts effectively.