Mazda CX5 sunroof switch replacement slider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement slider base for the sunroof control switch for the Mazda CX5.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
The sunroof control switch for the Mazda CX5 connects to a slider that is known to break when the car gets old. This model is an effective replacement for that slider. Mazda only sells replacement for the entire roof console, so this model could save you over a hundred bucks.
Ideally, print this in any filament that's more heat tolerant than PLA, such as ABS (which I think the original part is printed in) or PETG or even PC.
For best results, print upside down, with supports only on the large flat surface and the short riser with a hole in it. The rest can be handled by bridges. See the included 3mf if unsure.