Core Cassette (Upcycled MK4S to CoreOne Conversion Remains)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use the remains from the MK4S to Core One conversion kit to make a top mounted slide out spool holder
- Ocena
- 0 / 5
- Polubienia
- 68
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 1637
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a pet project I have been working on for a while. You can get more insight here:
The build for the CoreCassettee is relatively straightforward, however, you will need some additional things aside from the leftovers of the conversion. You may not need as many screws and nuts as listed below, this is the list of items used for the complete build:
QTY | Item |
2 | 30mm M3 Screw |
24 | 8mm M3 Screws |
2 | 12mm M3 Screws |
16 | 10mm M3 Screws |
8 | 6mm M3 Screws |
80 | M3 Square Nuts |
2 | M3 Lock Nuts |
As for the additional separate items, this is the list including Amazon links for reference:
QTY | Item | Link |
16 | Magnets 10mm x 2mm | |
4 | Magnets 15 x 3 mm with Opening for Screw | |
16 | 8mm Round Rubber Feet | |
1 | Ball Bearing 20 x 32 x 7 mm - 6804 ZZ | |
| 6mm x 1.5mm Foam Tape |
The perspex used is 4mm thick. If you are going to use thinner perspex, make sure you compensate by increasing the thickness of the foam tape to retain a tight fit.
Happy Making! :)