Motor Mount/Adaptor for RC Planes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This motor mount is designed to adapt a 22XX, 23XX or similar sized motor, to a traditional RC plane motor mounting size
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Motor Mount/Adaptor for RC Planes
This motor mount is designed to adapt a 22XX, 23XX or similar sized motor, to a traditional RC plane motor mounting size.
It converts a 16mm x 16mm mounting pattern (commonly used on FPV motors), to 33mm x 33mm; the same size as the metal "Cross Mounts" that are included with many RC plane motors. I designed this to use on the original AR Wing, but it should work for any other RC plane that uses this type of motor mount.
I printed this in PLA, but any hard plastic filaments should work.
Motor Mount/Adaptor for RC Planes: Motor_Mount_16x16-33x33.stl