Trichter für Kanister zum aufschrauben; M44 x 4; Funnel for canisters, screw-on type
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trichter für Kanister zum aufschrauben; M44 x 4; Funnel for canisters, screw-on type
- Ocena
- 0 / 5
- Polubienia
- 64
- Pobrania
- 189
- Wydruki
- 0
- Wyświetlenia
- 685
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Trichter für 5 oder 10 Liter Kanister zum aufschrauben. Gewinde M44 x 4.
Die mir zur Verfügung stehenden Kanister hatten ein Gewinde mit ca 43,5 bis 43,8 mm Aussendurchmesser. Die 4 mm Steigung war bei allen gleich.
Empfehle das Gewinde mit der niedrigst möglichen Layerhöhe zu drucken;
Empfehle ebenso vorher nur den Gewindeteil zu drucken und auf Paßgenauigkeit zu testen - falls er nicht passen sollte spart man eine Menge Zeit und Material.
........................
Funnel for 5 or 10 liter canisters, screw-on type. Thread M44 x 4.
The canisters I had available had threads with an outer diameter of approximately 43.5 to 43.8 mm. The 4 mm pitch was the same for all of them.
I recommend printing the thread with the lowest possible layer height.
I also recommend printing only the threaded part beforehand and testing for fit – if it doesn't fit, you'll save a lot of time and material.