LR140035 Air Compressor Expansion Chamber Discovery 5 L462
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of the Land Rover Discovery 5 L462 Air Compressor Expansion chamber. Apparently these go wrong a lot.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I mainly made this to challenge myself. I tested it without putting the whole compressor housing back together, but really I would not recommend using it in a car you rely on. It's only a £40 part.
On the other hand, seeing as the OEM part is made of ABS plastic, maybe it would be prudent to get an alu / steel one made?
However in my make I went with:
0.12mm Bambu PETG
6 walls
Gyroid, 25% infill
Printed in 2 parts, sealed together with hard plastic glue (add glue around the inner join also).