Drawerknob / -handle with customisable cover and hidden screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drawerknob with hidden screw and customisable and interchangeable cover.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Drawerknob with hidden screw and customisable and interchangeable cover. For the cover, you can use one of the four designs or design your own (blank STEP-files included). Feel free to share your own desings!
Print tips:
The base can be printed without any supports (at least on a MK4S)
The cover can be printed horizontally or vertically, but supports are needed in both cases
For the cover, I'd recommend using your minimal available layer height
Screws:
The screws should ideally be 3 - 4mm wide and (depending on the thickness of your drawer) at least 8 - 10mm long.