Draknight - printed replacement frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find just the carbon fiber piece, so I designed this to replace it when it breaks.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Fits stock draknight upper frame. Printed in PLA+. Protects the buzzer/tail light from getting destroyed if you crash in reverse (like during a matty flip). will update with some battery top mount parts.
Use M2*8 countersunk screws to mount the aluminum frame.
flipping the AIO mount screws so they all screw in from the bottom, and replace hex nuts with nylock nuts.
recommend removing the middle and front stock printed parts from the top, running vtx antenna through rear wing, and strapping battery to the top. the oblong holes in the sides of the aluminum frame pieces allow for thin strips of velcro.
flies decent, but beats spending $20 for another whole fragile frame.