Knob handle for SpannerHans Spool System MK6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
While I enjoy SpannerHands' spool system, the SpannerBot handle doesn't make for as easy printing as everything else,…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
While I enjoy SpannerHands' spool system, the SpannerBot handle doesn't make for as easy printing as everything else, but it didn't exactly fit the aesthetic I wanted.
So I remixed the knob from RenatoT into the handle mount from the SpannerBot handle by SpannerHans. (see remix info)
You might need to use some pliers to hold the nuts when sliding them in, but it should have enough clearance for the nut to be fully aligned with the hole before sliding in.
Update July 16. 2018V1
I didn't like how tinkercad had messed up the knobs geometry, so I redesigned it entirely in Fusion360, used V1 to get the updated version.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10-20%
Notes:
I've printed with both 10% and 20% infil, both work fine but the 20% is stronger if you don't mind the added print time.
If your slicer supports it, i also recommend Gyroid infill pattern for additional strength.
Category: 3D Printer Accessories