SideBox Hook (Prusa MK3/S/S+)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool and accessory hanging hook for your Prusa MK3 sidebox.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
🪝SideBox Hook
This is a custom-designed add-on hook for the popular Prusa MK3/MK3S/MK3S+ SideBoxes by KalleKnall. If you have space around and under the sidebox, you can upgrade the sidebox with some hooks!
Standard hooks can sometimes wobble or slide off when you lift your tools. To solve this, I added a stabilizing "back-claw" at the bottom. This claw braces firmly against the sidebox frame, keeping the hook secure and preventing it from twisting, swinging, or dropping when you remove your tools.
⚙ Print Settings
Orientation: Print it flat on its side.
Supports: If you are struggling with the first layer settings and model bending, try .3mf file with the little helper-plates. Just cut the plates off after printing.
Material: PLA/PETG
Print Time: 1pc/3-4min, 1set/20min - depends on your printing settings and profiles.
I have included single file, a single file with pre-set helper-plates, and a multi-pack file.
📐 Check the dimensions below to make sure it perfectly fits your printed sidebox:
Hope it will be helpfull and Happy printing! 🖨🍀