(Parametric) Mason Jar Liquid Culture Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A jar lid designed to contain liquid culture.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
If you plan to use this inside a pressure cooker, you MUST use a plastic that is heat resistant up to 121 °C (250 °F). I have had great success with High Temperature Polyamide (PAHT) that is carbon fiber reinforced. After 2 hours in the pressure cooker at 15psi these lids come out exactly how then went it.
You may be able to get away with using non-CF reinforced PAHT (which is heat resistant up to 120 °C), but I have bothered trying this specific filament. Acrylonitrile Butadiene Styrene (ABS) and Polypropylene (PP) are both heat resistant up to 100 °C and may be useful in some circumstances, but should not be used in a pressure cooker. Other plastics such as PLA and PETG are fine if you just want to have a lid with three holes in it, but should not be used if you plan to apply heat.
This jar also requires a self-healing injection port, a luer lock, and a filter:
Filter: https://a.co/d/0daV5gxY
Luer lock: https://a.co/d/04cNsbka
Injection port: https://a.co/d/00sHdT3u
The filter must be hydrophobic, 0.22um, and as large as possible (33mm).
Use the included "press" model to hammer the luer lock through the plastic in the lid so it stays in place. Use Thermal silicon to fix it in place (https://a.co/d/0fQvdbjW).