Crossbar holder for hurdles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Crossbar holder for hurdles e.g. for hobby-horsing. Goes together with the stand (another model).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Crossbar holder that is put on a 2cm diameter wooden pole (height can be adjusted by sliding) and holds a crossbar for jumping over it.
Goes together with the hurdle stand:
You would need to print both the stand and the crossbar holder twice, for the left and right side and you need 2 to 4 2cm wooden poles (cylindrical). The bottom horizontal pole is optional. The top can be a wooden pole or something softer.
Ideally printed with PETG but PLA should also work. Needs brim for better adhesion of the protruding parts. There is a rather big overhang which probably wouldn't print totally cleanly but is usable even without supports.