Bottle and wine cap -easy print- locks on
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeping the bugs away from your drinks simple but effective
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 1
- Wyświetlenia
- 85
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Simple and efficient!
There are 3 models for every bottle size.
You can print it in different colors so that nobody drinks out of your bottle.
The model has a nice grip to take the cap off.
The model inside is made conical, so the bottle cap locks on.
Even if your bottle falls over, the cap will stay on.
All models are printed with the following settings:
Print with a brim to prevent warping.
Layerheight: 0,2mm
Nozzle: 0.4
Wall lines: 3 or just adjust infill to 100%. your choice.
Bottle cap 25cl:
Model size: 32,63mm x 32,63mm x 24,72mm
only 5,86 grams of filament needed
Bottle cap 33cl:
Model size: 33mm x 33mm x 25mm
only 6,05 grams of filament needed
Wine cap:
Model size: 33,79mm x 33,79mm x 25,60mm
only 6,47 grams of filament needed