1 / 5
A way to secure your shades from the wind (idea sharing) — zdjęcie 1
1 / 5

A way to secure your shades from the wind (idea sharing)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The wind often blew down our shades so I developed a connection method to hold them in place

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
23
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I needed a way to lock the shades better to the frame. Before, already low wind lifted the shades, moved them and it was always a hassle to put them back in place. 

The sizes may not match your diameters and requirements but maybe you can adapt the parts to your needs in the slicer or model your own ones. You are welcome to steal the idea ;)

The TPU part slides firmly on the frame while the PETG part is slightly larger than the rod it attaches to so it is able to move freely, just to make the whole system less stiff.  

The parts can be disconnected so I can put away the shades in the winter. 

Some background: At first I designed It as a one part solution, just a TPU part which attaches to both ends. While it worked well on the frame, it did not attach properly to the small rod. The PETG works well as a rigid part and the end of the TPU part sits rather firmly in the PETG housing. Disassembly while leaving the single parts on each rod is a nice benefit.