Garden Fence latch for Chickens or other small animals
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple latch for decorative fencing gates using 10.3 mm tubing. Perfect for chicken runs.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Decorative Fence Gate Latch (10.3 mm Tube)
This simple latch was designed to keep the gate closed on decorative metal fencing commonly used for temporary chicken runs, garden enclosures, and small animal pens.
The latch snaps over the gate and adjacent fence panel to prevent the gate from swinging open while still allowing quick access when needed.
The design is sized specifically for fencing constructed from approximately 10.3 mm diameter tubing. Please verify your fence dimensions before printing.
Features
Simple one-piece design
Fast and tool-free installation
Helps keep gates securely closed
Ideal for chicken runs and garden fencing
Compact print requiring minimal material
No supports required
Material Recommendations
Because this part is used outdoors and flexes slightly during installation, the following materials are recommended:
PETG (recommended)
ASA
ABS
High-durometer TPU (95A or similar)
PLA is not recommended for long-term outdoor use.
Compatibility
Designed for decorative metal fencing made from approximately 10.3 mm diameter tubing.
Fit may vary depending on manufacturing tolerances and fence design.
Printing
Suggested settings:
0.20 mm layer height
3–4 perimeters
20–40% infill
No supports required
If printing in PETG, orient the model as supplied in the 3MF file for best strength.
If this latch solves a problem in your garden, chicken run, or animal enclosure, please post a make and share your results.