Flex PLA Print Settings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This .3mf file includes post-calibration print settings for flex PLA with the purpose of printing an airless basketball.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
This file serves as a generic starting point for calibrating flex PLA. If you are having trouble calibrating your flex PLA or not sure where to start, you can use these settings as a baseline and work from there. A benchy model was included in the file for your convivence. If you are using the same printer as me, you may be able to get away with using the settings as is, but I highly recommend for everyone to do your own calibration, these settings are only here to help you get started.
These settings were obtained after running calibration tests on my own printer. I used these settings to print an airless basketball. You can find more information about this on my TikTok or Instagram @3dprintandchill.
Print Details:
Printer: Anycubic Kobra 3 v2
Filament: Flashforge Flexible PLA (Orange)
Slicer: Orca Slicer